State/Error Flags; Device State Flags - Bosch IRIS-Net User Manual

Table of Contents

Advertisement

IRIS-Net
/IDX3E
pilotgenerator
level
/IDX3F
config type
/IDX40
config description
/IDX41
speaker
protection
/IDX42
thermo limiter

STATE/ERROR FLAGS

The available state/error flags are divided into following groups:
Global power amplifier / remote control module (Device State Flags),
Amplifier's input channels (Input Channel State Flags)
Amplifier's output channels (Output Channel State Flags)

Device State Flags

Flag
Description
POWER
The amplifier is in powered state (after power up delay gone) (collect / GPO reads inverted)
STANDBY
The amplifier is in standby state
CANPOLL
There is a timeout at master PCs CAN polling
NONVLT
There is a error in non volatile memory handling
COLLECT
Locally collected error state detection via individual mask for device and all input/output channels (can
be cleared by command)
GLOBAL
Globally collected error state of all selected other amps
OVT
Amplifier temperature is above upper limit
DIRTY
Current preset parameter setting is edited
PRSGATE
The possibility of a "dangerous" preset change is enabled
BRIDGED
The amplifier's bridged mode is selected.
PARALLEL
The amplifier's parallel routing is selected
GNDLIFT
The connection switch "chassis to ground" is open
LEVELCTRL
The level controls at the power amp's front panel are disabled
VOLTDOUB
The mains voltage-doubler is active, 115V-mode
THERMSD
The thermal shutdown is active
CBPWARN
The circuit-breaker-protection is close before action
AESLOCK
The AES/EBU digital audio interface is in locked state (collect / GPO reads inverted)
ERRDISP
The LC-display indicates a error message
AESERROR
The AES/EBU digital audio interface is in erratic state
VLT_WARN
Mains voltage warning
Bosch Security Systems B.V.
-128...+40
dB(u) at power amp output
0...7
0 = fullrange, 1 = sub, 2 = sublo, 3 = lo, 4 = lomid, 5 = mid, 6 = midhi, 7 = hi
can't be represented by numerical value
can't be represented by numerical value
can't be represented by numerical value
User Manual
REMOTE AMPLIFIER | en
2017.05 | 3.20 | F.01U.119.956
231

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents