Suspensions
•
Remove the wheel spindle fixing nut.
•
Retrieve the sealing washer.
•
Loosen the screws on the wheel spin-
dle clamps.
•
Tap the wheel spindle slightly with a
rubber mallet so that the hole on the
opposite side is exposed.
•
Remove the wheel spindle by inserting
a screwdriver in the holes on the pin.
•
During extraction, support the wheel
and then remove it.
Checking the front wheel
FRONT WHEEL BEARINGS
Carry out the check with the bearings fitted on the wheel.
SUSP - 362
RSV4 R