Water Pump - APRILIA RSV4 R Service Station Manual

Hide thumbs Also See for RSV4 R:

Table of Contents

Via the filler orifice on the expansion

tank, fill with the quantity of coolant

necessary to reach the FULL marking,

then refit the cap.

Start the engine, run at idle speed and

wait for the electric fans to activate (ap-

prox. 101 °C - 213 °F) then turn off the

engine and wait for it to cool.

With the vehicle standing vertically,

check the liquid level both in the radia-

tor and in the expansion tank and top

up if necessary.

Water pump

Drain the coolant.

Remove the pipe from the radiator.

Unscrew and remove the two screws

fastening the pipe to the engine.

Retrieve the gasket and replace with a

new component when refitting.

Table of Contents