NETGEAR GS724TPv2 User Manual page 253

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
The following table describes the per-port statistics on the page.
Table 53. Port statistics
Field
Interface
Total Packets Received
Without Errors
Packets Received With Error The number of inbound packets that contained errors preventing them from
Broadcast Packets Received The total number of good packets received that were directed to the
Packets Transmitted Without
Errors
Transmit Packet Errors
Collision Frames
Time Since Counters Last
Cleared
Reset Counters for All Interfaces on the Switch

To reset the counters for all interfaces on the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Ports > Port Statistics.
The Port Statistics page displays.
6. Select the check box in the heading of the table.
7. Click the Clear button.
Description
This object indicates the interface of the interface table entry associated with
this port on an adapter.
The total number of packets received that were without errors.
being deliverable to a higher-layer protocol.
broadcast address. This does not include multicast packets.
The number of frames that were transmitted by this port to its segment.
The number of outbound packets that could not be transmitted because of
errors.
The best estimate of the total number of collisions on this Ethernet segment.
The elapsed time in days, hours, minutes, and seconds since the statistics
for this port were last cleared.
Monitor the System
253
Change the Default IP Address of the