NETGEAR GS724TPv2 User Manual page 38

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
You can also specify the number of hours and number of minutes that the time zone is
different from the Coordinated Universal Time (UTC). The time zone can affect the
display of the current system time. The default is UTC.
Note: When using SNTP/NTP time servers to update the switch's clock, the
time data received from the server is based on the UTC, which is the
same as Greenwich Mean Time (GMT). This might not be the time
zone in which the switch is located.
15. In the Offset Hours field, specify the number of hours that the time zone is different from
UTC.
The allowed range is –12 to 13. The default is 0.
16. In the Offset Minutes field, specify the number of minutes that the time zone is different
from UTC.
The allowed range is 0 to 59. The default is 0.
17. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Configure the Global SNTP Settings

To configure the global SNTP settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > Time > Time Configuration > SNTP Global
Configuration.
When you select the SNTP option as the clock source, the SNTP Global Configuration
section is displayed below the Time Configuration section of the page.
Configure System Information
38
Change the Default IP Address of the