NETGEAR GS724TPv2 User Manual page 223

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
c. In the VLAN ID field, specify which VLAN must be compared against the information
in an Ethernet frame.
Valid range of values is 1 to 4093. Either a VLAN range or VLAN can be configured.
d. In the Binding Configuration section, from the Direction menu, select the packet
filtering direction for the ACL.
Only the inbound direction is valid.
e. In the Ports and LAG tables in the Binding Configuration section, select the ports
and LAGs to which the ACL must be applied.
f. Click the Add button.
The rule is added to the ACL and is based on the destination MAC.
12. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Modify an ACL Rule

To modify an ACL rule:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > ACL > ACL Wizard.
The ACL Wizard page displays.
6. Select check box that is associated with the rule.
7. Update the match criteria as needed.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
Change the Default IP Address of the
Manage Device Security
223