NETGEAR GS724TPv2 User Manual page 48

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
The fields that are described in the following table are visible on the page only if the DayLight
Saving (DST) Recurring, Recurring EU, or Recurring USA radio button is selected.
Table 7. Daylight saving setting is Recurring, Recurring EU, or Recurring USA
Field
Begins At
Ends At
Offset
Zone
The fields that are described in the following table are visible on the page only if the DayLight
Saving (DST) Non Recurring radio button is selected.
Table 8. Daylight saving setting is Non Recurring
Field
Begins At
Ends At
Description
These fields are used to configure the start values of the date and time.
• Week. Configure the start week.
• Day. Configure the start day.
• Month. Configure the start month.
• Hours. Configure the start hours.
• Minutes. Configure the start minutes.
These fields are used to configure the end values of date and time.
• Week. Configure the end week.
• Day. Configure the end day.
• Month. Configure the end month.
• Hours. Configure the end hours.
• Minutes. Configure the end minutes.
Configure recurring offset in minutes. The valid range is 1–1440
minutes.
Configure the time zone.
Description
These fields are used to configure the start values of the date and time.
• Week. Configure the start week.
• Day. Configure the start day.
• Month. Configure the start month.
• Hours. Configure the start hours.
• Minutes. Configure the start minutes.
These fields are used to configure the end values of date and time.
• Week. Configure the end week.
• Day. Configure the end day.
• Month. Configure the end month.
• Hours. Configure the end hours.
• Minutes. Configure the end minutes.
Configure System Information
48