Configure Multicast Group Membership - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > Multicast > Static Multicast Address > Multicast Group
Configuration.
The Multicast Group Configuration page displays.
6. Select the check boxes for the statically added multicast addresses that you want to remove.
7. Click the Delete button.
The multicast groups are removed.

Configure Multicast Group Membership

By default, an interface is excluded from multicast groups but could be dynamically added to
any multicast group. You can manually add interfaces to a group (which changes the type of
the group from dynamic to static) and you can lock interfaces so that they cannot be added
dynamically to a group.

To configure multicast group membership:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > Multicast > Static Multicast Address > Multicast Group
Membership.
Change the Default IP Address of the
Change the Default IP Address of the
Configure Switching
145