NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
7.
In the Description field, enter the description for the OUI.
The maximum length of description is 32 characters. The following OUIs are present in
the configuration by default:
•
00:01:E3 - SIEMENS
•
00:03:6B - CISCO1
•
00:12:43 - CISCO2
•
00:0F:E2 - H3C
•
00:60:B9 - NITSUKO
•
00:D0:1E - PINTEL
•
00:E0:75 - VERILINK
•
00:E0:BB - 3COM
•
00:04:0D - AVAYA1
•
00:1B:4F - AVAYA2
8.
Click the Add button.
The telephony OUI entry is added.
Delete One or More OUI Prefixes From the OUI Table
To delete one or more OUI prefixes from the OUI table:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch
on page 9.
The login window opens.
4.
Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5.
Select Switching > Auto-VoIP > OUI-based > OUI Table.
The OUI Table page displays.
6.
Select the check box next to each OUI prefix to be removed.
7.
Click the Delete button.
The telephony OUI entries are removed.
Change the Default IP Address of the
Configure Switching
115