Set Up Poe Timer Schedules; Create A Poe Timer Schedule - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
Table 16. DHCP Dynamic Configuration information
Field
Interface
MAC Address
VLAN ID
IP Address
Lease Time

Set Up PoE Timer Schedules

The switch lets you define multiple timer schedules that you can use for PoE power delivery
to attached PDs.
After you create a timer schedule, you can associate it with one or more PoE ports (see
Configure the PoE Port Settings
each PoE port.
After you associate a timer schedule with a PoE port, the start date and time force the PoE
port to stop delivering power and the stop date and time enable the PoE port to start
delivering power.

Create a PoE Timer Schedule

The maximum number of timer schedules that you can add is 25.

To create a PoE timer schedule:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
Description
The interface on which the DHCP client message was received.
The MAC address associated with the DHCP client that sent the message. This is the
key to the binding database.
The VLAN ID of the client interface.
The IP address assigned to the client by the DHCP server.
The remaining IP address lease time for the client.
on page 60). You can use a separate timer schedule for
Configure System Information
Change the Default IP Address of the
87