Maintenance - Saeco SUP040RB Operation And Maintenance

Insert the brew group into its seat again until it locks into
place WITHOUT pressing the "PRESS" button.
Insert the coffee grounds drawer and the drip tray. Close
the service door.
10.2.11 DESCALING
Limescale is a natural part of the water used for machine
operation. It needs to be removed regularly as it may clog
the water and coffee circuit of your appliance.
The advanced electronics shows on the machine display
(with clear icons) when descaling is needed. Just follow the
steps described below.
This operation needs to be carried out before the
appliance stops working properly, as in this case repair is
not covered by warranty.
Use the Saeco descaling product only. Its formula has been
specifically designed to
performance and operation for its whole operating life. If
correctly used, it also avoids alterations in the dispensed
product.
The descaling solution and the complete "Maintenance Kit"
may be purchased at your local dealer or at authorised
service centres.
Never drink the descaling
solution or any products
brewed until the cycle has
been completed.
ensure better machine
Never use vinegar as a
descaling solution.
Turn on the machine by pressing the ON/OFF button.
Wait for the machine to complete the rinse and warm-up
process.
Remove the "Intenza" filter
before adding the descaling
solution.
Switch to programming mode as described in section
"Access to the Programming Menu".
Press the "Clean" button and select the "MACHINE
MENU" option; press the "Coffee" button to access the
menu.
Press the "Clean" button and select the "MAINTENANCE"
option; press the "Coffee" button to access the menu.
English
97