Description Of Controls; Power Button; Display; Keypad - Saeco SUP040RB Operation And Maintenance

English
6

DESCRIPTION OF CONTROLS

6.1

Power button

It is located in the lower left part in the rear of the
machine.
If set to the "I" position the machine turns on (electrical
functions enabled).
If set to the "O" position the machine turns off (electrical
functions disabled).
6.2

Display

The display shows the messages during normal operation
and during the programming and maintenance phase.
6.3

Keypad

The function of each button
changes according to the
change of the appliance
phase (ordinary dispensing
or programming phase).
Each button has a double
function according to the
appliance
operation or programming).
26
state (normal
1
"Espresso" button
2
"Coffee" button
3
"Hot Water" button
4
"Special Beverages" button
5
"Cappuccino" button
6
"Latte Macchiato" button
7
"Clean - Cappuccinatore Cleaning Cycle" button
8
"Stand-by" button
6.4 Button Description during
Normal Operation
"Espresso" button
When this button is pressed, an espresso coffee is brewed.
"COFFEE" button
When this button is pressed, a cup of coffee is brewed.
"Hot Water" button
When this button is pressed, hot water is dispensed.
"Special Beverages" button
When this button is pressed, the menu for preparing other
types of beverages is accessed.
"Cappuccino" button
When this button is pressed, a cappuccino is brewed.
"Latte Macchiato" button
When this button is pressed, a Latte Macchiato is brewed.
"Clean - Cappuccinatore Cleaning Cycle" button
When this button is pressed, the machine starts an
automatic quick cleaning cycle of the Cappuccinatore.
"Stand-by" button
When this button is pressed, the machine Stand-by mode
is activated.