Information About The Appliance; Information For The Maintenance Technician; Description And Intended Use; Appliance Identification - Saeco MAGIC M2 Technical Manual

English
2

INFORMATION ABOUT THE APPLIANCE

2.1

Information for the Maintenance Technician

The appliance must be installed in a well-lit,
sheltered and dry place and on a table
suitable to bear its weight.
To ensure its correct operation and reliability over time, comply with the following
recommendations:
• ambient temperature: from +2°C to +32°C;
• maximum humidity allowed: 80% (non-condensed).
For special installations, not covered by this manual, please contact the dealer or
the local importer. If this is not possible, please contact the Manufacturer.
The technical service is available for any explanation or information regarding the
correct operation of the machine and to satisfy any request for spare parts supply
or technical assistance.
The Maintenance Technician must carefully read and observe the safety warnings
contained in this manual to ensure that installation, start-up, use and maintenance
operations are performed in complete safety.
The Maintenance Technician is responsible for keeping or giving the keys to access
internal parts of the machine to another operator (Supply operator), and is the sole
responsible for any servicing procedure.
This manual is an essential part supplied with the machine and should always be
available for reference before any operation on the machine.
2.2

Description and Intended Use

This machine is automatically used to brew:
• coffee and espresso coffee using instantly ground coffee beans;
• hot water to prepare beverages;
• milk-based beverages using the Cappuccinatore supplied. (*only versions M).
The elegant machine housing has been designed for use in small offices, businesses
and institutions.
Using the machine for any other purpose is considered dangerous and as a misuse.
Misuse voids all forms of warranty, releasing
the Manufacturer from any responsibility
for damage to property and/or personal
injury.
The following are also considered misuse:
• any use other than the intended use and/or employing methods other than those
described in this manual;
• any operation on the machine in breach of the instructions provided in this manual;
• any tampering with parts and/or safety devices not previously authorised by the
Manufacturer and performed by unauthorised personnel;
• machine installation in an outdoor environment.
In such cases the customer will be charged with the machine repair cost.
18
2.3

Appliance Identification

The appliance is identified by the model name and serial number shown on the
special plate.
1 Name of the Manufacturer
2
Supply voltage (V)
3 Water mains pressure
4
Marks of conformity
5 Certifying organization
6 appliance code.
7
Model
8 Supply frequency (Hz)
9
Electrical power consumption (W)
10 Serial number
11 Year and month of manufacture
12
Country of manufacture
It is strictly forbidden to tamper with or
modify the data plate.
When contacting the technical service,
always refer to this plate by indicating the
technical data shown on it.