Saeco SUP040RB Operation And Maintenance page 91

Wash the container used for the solution thoroughly and
fill it with 1/2 (half) litre of fresh drinking water which will
be used for rinsing.
Empty the container placed under the dispensing spout.
Insert the suction hose into the container used. Press the
"Coffee" button to confirm.
Place an empty container under the dispensing spout and
press the "Coffee" button to confirm.
The machine performs a Cappuccinatore rinse cycle. The
bar shows the rinsing progress.
Wait until the cycle stops automatically. The machine will
go back to the normal operating cycle.
Wash all the Cappuccinatore parts as described in the
"Cleaning the Cappuccinatore (After Each Use)" section.
It is advisable to remove
the Cappuccinatore from
the machine when not
being used, in order to
keep it clean.
10.2.8 Brew Group Cleaning
The brew group should be cleaned whenever the coffee
bean hopper is filled, or at least once a week. Turn off the
machine by switching the power button to the "O"
position and remove the plug from the socket. Remove
the drip tray and the group compartment drawer.
Open the service door with the supplied key.
English
91