Rinse/Self-Cleaning Cycle - Saeco SUP040RB Operation And Maintenance

English
Once warm-up has been completed, the machine performs
a rinse cycle of the internal circuits.
The progress bar indicates
that the
performing the rinse cycle
of the system.
A small amount of water is dispensed. Wait until the cycle
is completed.
The cycle
interrupted by pressing the
"Special Beverages" button.
Then the machine is ready for use.
When the logo is displayed, the machine is ready for use.
60
machine is
can be
If the machine is used for
the first time or after a
long period of inactivity,
contact
Provider to start it up.
9.3

Rinse/Self-Cleaning Cycle

This cycle allows the internal coffee circuits to be rinsed
with fresh water. The cycle is carried out:
• At machine start-up (with cold boiler);
• After priming the circuit (with cold boiler);
• During the Stand-by preparation phase (if at least one
coffee-based product has been brewed);
• When turning off the machine after pressing the
"Stand-by" button (if at least a coffee product has been
brewed).
A small amount of water will be dispensed to rinse and
heat all the machine parts. This icon is displayed.
Wait for this cycle to be completed automatically. the
dispensing process can be interrupted by pressing the
"Special Beverages" button.
the Service