Saeco SUP040RB Operation And Maintenance page 79

Press the "Coffee" button to access.
Press the "Coffee" button to enter the "GENERAL
MENU".
To select the "SELF LEARNING" option, press the "Clean"
button. Press the "Coffee" button to access.
To select the "ON" option, press the "Clean" button.
Press the "Coffee" button to confirm.
Press the "Special Beverages" button numerous times to
exit programming mode.
When the function is enabled, press the button of the beverage
that you wish to set and stop the brewing process when desired,
as shown on the display. The procedure for programming a
cappuccino is explained as an example. Before carrying out the
programming procedure, prepare the machine as described in
section "Brewing a Cappuccino".
Place a cup under the dispensing spout.
Press and hold the "Cappuccino" button until the "MEMO"
message is displayed and remove your finger. The machine
is now in programming mode.
The machine starts the milk dispensing phase. The "STOP
MILK" message is displayed.
Press the "Special Beverages" button when the desired
amount of milk is reached in the cup.
English
79