Adjusting Brewed Products - Saeco SUP040RB Operation And Maintenance

Steam
This function is only available if
previously activated by the
service provider.
Danger
Dispensing
preceded by small jets of
hot water.
wand may
temperatures.
This program allows steam to be dispensed in order to
heat the beverages directly in the container.
Press the "Special Beverages" button to access the menu.
Press the "Clean" button to select "STEAM".
Place a suitable container under the dispensing spout.
of burning!
may be
The steam
reach high
Press the "Coffee" button to confirm.
The machine warms up the system. Once the required temperature is
reached, the steam dispensing procedure is started.
To stop steam dispensing, press the "Special Beverages" button.
Clean the steam wand with a wet cloth after use, if necessary.
9.12

Adjusting Brewed Products

The machine allows you to adjust the product length
according to your needs and to the type of cup used.
The product length in the cup or glass can be set by two
methods:
• Numeric Method
• Visual Method
9.12.1 Numeric Method
To set the length with this method, enter the "BEVERAGE
MENU" and program each available beverage using the
keypad. This system requires the user to carry out a
subsequent check of the actual quantity of product brewed
in the cup.
The procedure for programming a cappuccino, with
detailed operational sequences, is explained as an example.
Switch to programming mode as described in section
"Access to the Programming Menu".
English
75