Safety; Preamble; General Safety Instructions - Saeco SUP040RB Operation And Maintenance

Aulika automatic machine for espresso coffee and hot beverages
Table of Contents

Advertisement

English
3

SAFETY

3.1

Preamble

In
accordance
with
the
regulations, SAECO VENDING has prepared a technical
file relating to the AULIKA machine at its premises,
acknowledging the following standards in the design stage:
-
EN 55014
-
EN 6100-3-2
-
EN 61000-3-3
-
EN 61000-4-2
-
EN 61000-4-3
3.2

General Safety Instructions

It is forbidden to:
• tamper with or disable the safety systems installed on the
machine;
• perform maintenance operations on the appliance, before
unplugging the power cord;
• install the appliance outdoors. It is advisable to place it in a
dry place where the temperature does not drop below
2°C, in order to prevent any possible freezing.
• use the appliance for purposes other than those indicated
in the sale contract and in this manual;
• electrically connect the appliance using multi-sockets or
adapters;
• use jets of water for cleaning operations.
14
applicable
standards
and
-
EN 61000-4-4
-
EN 61000-4-5
-
EN 61000-4-11
-
EN 60335-2-75
-
EN 60335-1
It is mandatory to:
• check conformity of the power supply;
• use original spare parts;
• carefully read the instructions contained in this manual and
in the attached documents;
• use personal protective equipment when performing
installation, testing and maintenance operations.
Precautionary measures to prevent human errors:
• make the operator aware of safety issues;
• handle the appliance, either packaged or unpackaged, in
complete safety;
• deeply know the installation procedures, its correct
operation and its limits;
• dismantle the appliance in complete safety, in accordance
with the workers' health and environmental protection
regulations in force.
To
prevent
residues from coming into
contact with the beverages,
dispense about 0.5 l of
water for each dispensing
path
before
starting the machine. The
dispensed beverages can
be
drunk
performing this operation.
machining
definitely
only
after

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents