Saeco SUP040RB Operation And Maintenance page 96

English
At the end of the cycle,
after performing the rinse
cycle, the machine goes
back to
operating mode.
It is recommended to remove
the group and wash it under
fresh running water.
10.2.10 Brew group lubrication
Lubricate the brew group after approximately 500 cups of
coffee or once a month.
The grease to lubricate the brew group and the complete
"Service Kit" can be purchased at your local dealer or at
authorised service centres.
To display the number of
coffee cups brewed, please
refer to the "COUNTERS"
menu in the "BEVERAGE
MENU"
"Description of Messages in
the Programming Menu").
Before lubricating the brew group, clean it under running
water as described in the "Brew Group Cleaning" chapter.
96
its normal
(see section
Lubricate the brew group guides using Saeco grease only.
Apply the grease evenly on both side guides.
Lubricate the shaft too.