Saeco SUP040RB Operation And Maintenance page 48

English
MENU ITEM
.
Coffee temperature
.
Low
.
Normal
.
High
.
Coffee Length
.
Milk Quantity
.
High Speed Milk
.
Off
.
On
.
Default
.
Hot Water
.
Water Quantity
.
Default
.
Special Beverages
.
Long Coffee
48
Description
This section allows the coffee brewing temperature to be programmed.
low temperature.
standard temperature.
high temperature.
This section allows you to program the amount of coffee to be brewed for each selected
beverage.
The bar allows you to set the exact amount of coffee to be brewed (the value is
measured in turbine pulses).
These settings are valid only for programming milk-based beverage dispensing.
This section allows you to program the amount of milk dispensed for each selected
beverage.
The bar allows you to set the exact amount of milk to be dispensed (the value is
measured in seconds).
These settings are valid only for programming milk-based beverage dispensing.
This section allows the machine to dispense milk and coffee at the same time.
Milk and coffee are dispensed in two separate steps.
NOTE:
in this case, the various dispensing stages (coffee or milk) can be individually stopped.
Milk and coffee are dispensed at the same time.
NOTE:
in this case, the user can only stop dispensing the beverage as a whole.
Setting ECOMODE to OFF brings down the dispensing time of mixed products.
The original standard values assigned by the manufacturer to each beverage can be reset,
according to the selected language.
After selecting this function, the customised individual beverage settings are deleted.
To manage hot water dispensing parameters.
These settings are valid only for programming hot water dispensing.
This section allows you to set the amount of water to be dispensed when pressing the
corresponding button.
The bar allows you to set the exact amount of water to be dispensed (the value is
measured in turbine pulses).
The original standard values assigned by the manufacturer to each beverage can be reset,
according to the selected language.
After selecting this function, the customised individual beverage settings are deleted.
To access special beverage management.
To manage long coffee brewing parameters.