Dtmf Phone List (Jt1000 And Visar Models Only) - Motorola HT 1000 User Manual

DTMF Phone List
(JT1000 and VISAR
Models only)
DCGE
Function Key Descriptions
F2 - DTMF CONFIG
F5 - PRINT
F9 - DEFAULT
Field Definitions
DTMF Tx Pre-Time
DTMF Digit Duration
From the MAIN MENU, press F4, F3, F7, and then F5 to access this
screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model :
Serial:
CHANGE:RADIO:SIG:DTMF
DTMF Tx Pre-Time.......... 250 ms
DTMF Digit Duration.....152.44 ms
DTMF Inter-Digit Delay..103.00 ms
F1 F2 F3 F4
HELP DTMF
CONFIG
This screen can be accessed only for models with DTMF keypads. Brings up
a screen from which you can configure DTMF options.
This function will be visible only for VISAR models. Brings up a screen
from which you can configure additional DTMF options.
Prints the current system configuration.
Resets the fields on this screen to their default values.
Enter a value directly or use the UP/DOWN arrow keys to make your
selection. The is the time period that carrier or carrier with PL (if on a
PL channel) will be sent before the first DTMF digit is transmitted. The
value is expressed as a multiple of 25 ms, ranging from 25 ms to 6.375
seconds.
The default is 250 ms.
Enter a value directly or use the UP/DOWN arrow keys to make your
selection. This is the actual time duration for which DTMF tones are
transmitted on the channel for a single digit during auto-dial, or
manual dial if a timed tone duration is selected. The valid range is 4.12
to 1050.6 ms in 4.12-ms increments. A value of zero is NOT allowed.
The default is 152.44 ms.
Use edit keys to modify entry.
Use <Enter> to go to next feature.
DTMF PHONE LIST
---------------
DTMF Access Code..............8888
DTMF De-Access Code...........9999
F5 F6 F7
PRINT
F8 F9 F10
DEFAULT EXIT
125