Mode Switch Position Assignment (Ht/Jt1000 Only) - Motorola HT 1000 User Manual

Mode Switch
Position
Assignment
(HT/JT1000 only)
DCF
Function Key Descriptions
F5 - PRINT
F9 - DEFAULT
Field Definitions
Radio Mode Switch
96
From the MAIN MENU, press F4, F3 and then F6 again to access this
screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model : H01SDC9AA3AN
Serial:
CHANGE:RADIO:MODE SWITCH
Scan/Scan Program 1
Scan/Scan Program 2
Scan/Talkaround
Scan/Squelch Defeat
Scan/PAC•RT
Talkaround
Function Position A
1
2 Channel Option Sq
F1 F2 F3 F4
HELP
The three-position toggle switch on top of HT/JT1000 radios (also
known as the A-B-C Toggle switch) can have two functions assigned to
each of its positions. This screen allows you to select the desired
combination of functions.
Note: If an Advantage™ Board is installed in the radio and the Mode
Switch (ABC Switch) is functionally used by the Advantage Board,
that switch must be set to "Blank" to prevent dual usage.
Prints the current system configuration.
Resets the fields on this screen to their default values.
Select a mode by pressing Enter and/or Tab to navigate between and
within the fields. Functions for positions A through C change
automatically to reflect the selected mode. The table on page 98 shows
the available modes and their associated functions.
The default is Squelch Defeat.
In the table at the bottom of the screen, the columns marked Position
A, B and C, correspond to the physical positions of the switch. The
rows marked Function 1 and 2 correspond to the functions assigned to
those positions. As you navigate through the different function
combinations at the top of the screen (using Enter, Tab, or arrow keys)
you will notice the assigned functions changing.
Use arrow key to select switch mode.
Radio Mode Switch
-----------------
Squelch Defeat
PAC•RT
Hi & Low Pwr
Hi & Low Pwr/Scan
Talkaround/PL
Scan
Position B
Carrier squelch
F5 F6 F7
PRINT
Scan/Ch.Opt Talkaround
Ch.Opt Talkaround
Blank
Unsupported Switch
Position C
Carrier squelch
F8 F9 F10
EXIT