Motorola HT 1000 User Manual page 112

Repeater Ack Alert
Emergency
Emergency Tx Light
Emergency Alert
Emergency Ack Alert
Silent Emergency
Silent Emergency w/Voice
106
Use the UP/DOWN arrow keys to enable/disable this option. If this
feature is enabled, an alert will sound when the acknowledgment to
Manual Repeater Access is received.
The default is Enabled.
All the fields listed below will be visible only if this field is set to Enabled.
Use the UP/DOWN arrow keys to enable/disable Emergency operation
in the radio. If this field is enabled, the radio will be capable of
Emergency operation.
This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, the LED will light up when an emergency
message is transmitted.
The default is Enabled.
This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, an alert will be generated when the
emergency switch is pressed at a time that the radio is in a non-silent
emergency mode.
The default is Enabled.
This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, an alert will be generated when an MDC
emergency alarm acknowledgment is received.
The default is Enabled.
This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, both audio and visual feedback from the
radio will be inhibited during an emergency silent alarm.
The default is Disabled.
This field will be visible only if the Emergency field on this screen is set to
Enabled. Use the UP/DOWN arrow keys to enable/disable this option.
If this feature is enabled, the radio will unmute to dispatch traffic only
after the silent alarm sequence is completed. No tones will be sounded.
The default is Disabled.