Side Button Configuration ( Ht 1000 "B" And Jt1000 Models ) - Motorola HT 1000 User Manual

Side Button
Configuration
(HT 1000 "B" and
JT1000 Models)
DCC
Function Key Descriptions
F5 - PRINT
F9 - DEFAULT
Field Definitions
Sidebutton Functions
88
From the MAIN MENU, press F4 and then F3 twice to access this
screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model : H01SDC9AA3BN
Serial:
CHANGE:RADIO:SIDE BUTTON
Sidebutton 1 function.................................Select Button
Sidebutton 2 function.........................................Blank
Sidebutton 3 function.......................................Monitor
Monitor Long Press Period (sec)...................................5
Permanent Monitor...........................................Enabled
Permanent Monitor Definition...........................Open Squelch
External Mandown Switch.....................................Enabled
F1 F2 F3 F4
HELP
Note: If an Advantage™ Board is installed in the radio and Side
Button 2 is functionally used by the Advantage Board, that button
MUST be set to "Blank" to prevent dual usage.
Prints the current system configuration.
Resets the fields on this screen to their default values.
Use the UP/DOWN arrow keys to select the functions for this button.
Not all functions are available on all models.
Note: The RSS will not allow side button functions to be duplicated
on more than one button, or allow you to duplicate a function that is
assigned to another control (for example, Scan on a side button
and Channel-Slaved Auto-scan in the same radio). If Scan is
already assigned to another control, Scan-related selections will
not be displayed on this screen.
The possible functions that can be assigned to Sidebuttons 1, 2 and 3
are:
Blank No function, no key chirp is sounded.
Monitor Radio will unsquelch when this button is pressed,
allowing you to listen to activity on the channel.
RAT An MDC Repeater Access Code will be transmitted when
this button is pressed. Available only with HT 1000 models.
Use <: keys to adjust value.
Use <Enter> key to go to next feature.
Side Button Configuration
-------------------------
F5 F6 F7
PRINT
F8 F9 F10
DEFAULT EXIT