Phone; Making A Phone Call (For Keypad Radios Only) - Motorola PRO5150 User Manual

PHONE

If your radio has access to a telephone system,
you can make a phone call. To do this, your
radio must send an access code to a station
that connects it to a phone line. (Ask your
dealer for more details.) After completing a
call, your radio must send a deaccess code to
hang up.
Note: In order to receive a phone call, your
radio must have a DTMF decode board
installed. Ask your dealer for details.
MAKING A PHONE CALL
(for keypad radios only)
You can make a phone call by using the
preprogrammed Phone button (see page 8).
To initiate a phone call, do the following:
1 Press the Phone Button.
2 You will hear a series of tones, indicating that
an access code is being sent automatically.
–
or–
Enter your access code using the keypad.
When you hear a dial tone:
3
Enter the phone number using the keypad.
–
or–
a Press and release the preprogrammed
Speed Dial button (see page 8) to use the
Speed Dial feature.
b Press the key (1 to 9) corresponding to the
number you want to call, or press "0" if you
want to call the last number dialed.
Note: Press the PTT button, if required for your
radio.
Note: To redial the last number dialed (if not
using Speed Dial), press and release
the PTT button. The radio sends the
last number dialed.
–
or–
If you entered your access code using
the keypad, press the
access the last number dialed; then
press and release the PTT button.
/
key once to
23
English