Changing A Field Value - Motorola HT 1000 User Manual

Changing A Field
Value
Tab or Enter
Del
PgUp and PgDn
UP/DOWN Arrow Keys
LEFT/RIGHT Arrow Keys
Backspace
Information fields
Scrollable fields
Direct-entry fields
A
12
The keys commonly used in the RSS to change a field value and their
respective functions are listed below.
Used to accept data currently in the field and move the prompt
forward one field. If the entry is not accepted (i.e., is probably not a
valid value), an error beep will sound. Use Shift-Tab to move to the
previous field.
Used to erase the current character in a field.
Used to display the previous/next page of information on the screen.
The Num Lock key must be off.
Use to increment/decrease a field value or scroll through the available
values.
Used to move the cursor within the field.
Used to erase the previous character and move the cursor left.
RSS fields are of three basic types:
Non-editable fields which cannot be altered or changed.
Contain a range of values or several options from which you can select
the desired value/option. To edit or change a choice, press the arrow
key(s).
The desired value must be typed in using the keyboard. To edit or
change a choice, type in an acceptable value.
Changing a field's value is typically done either by scrolling through a
list of options (in scrollable fields) or by typing in a correct or
acceptable value (in direct-entry fields). Scrolling is accomplished
using the arrow keys.