Transmit Vco Crossover Alignment - Motorola HT 1000 User Manual

Transmit VCO
Crossover
Alignment
BBG
Function Key
Descriptions
F6 - TOGGLE PTT
F8 - PROGRAM VALUE
Field Definitions
New Softpot Value
Current Frequency
New Frequency
36
From the MAIN MENU, press F2 twice and then F7 to access the
TRANSMIT VCO CROSSOVER ALIGNMENT screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model:
Serial:
SERVICE:XMIT ALIGN:VCO CROSSOVER

Transmit VCO Crossover Alignment

--------------------------------
Current
Value
161.50500
136.00000
MIN |----+----+----+----+----X----+----+----+----+----+----+----| MAX
F1 F2 F3
HELP
This alignment procedure warps the reference oscillator of the radio.
Refer to your Radio Service Manual for details on the Transmit VCO
Crossover Alignment procedure.
This procedure should be attempted only by qualified
!
service personnel. Failure to perform alignment
procedures properly may result in seriously degraded
Caution
radio or system performance.
Alternately keys and de-keys the radio being serviced (that is, toggles
PTT).
Programs the selected value into the radio.
This is the VCO softpot value for this frequency. The status bar shows
the relationship between this setting and the minimum and
maximum settings.
This is the current VCO Crossover Frequency. The status bar shows the
relationship between this setting and the minimum and maximum
settings.
This is the working VCO Crossover Frequency. The status bar shows
the relationship between this setting and the minimum and
maximum settings.
Use <: or <SHIFT><<SHIFT>:keys
to change softpot.
New Softpot Value..... 161.50500
Transmitter..Off
F4 F5 F6 F7
TOGGLE
PTT
178.00000
F8 F9 F10
PROGRAM EXIT
VALUE