Motorola HT 1000 User Manual page 104

HT/JT1000 Mode Switch
Functions
1
2
3
4
#
5
6
7
#
8
*
9
*
10
11
12
13
14
15
16
*
#
98
The Mode/Switch functions for HT/JT1000 radios are provided in the
table below:
Mode
Scan & Scan
Programming 1
Scan & Scan
Programming 2
Scan and Talkaround
Scan/Squelch Defeat
Scan & PAC•RT
Operation
Talkaround Only
Squelch Defeat
PAC•RT
Hi-Low Power
Hi-Low Power & Scan
Talkaround/PL
Scan
Scan/Channel Option
Talkaround
Channel Option
Talkaround
Blank
Unsupported Switch
Not available on JT1000 models and 800 MHz HT 1000 models.
Not available on 800 MHz models.
Note: Where the switch position description says "Channel
Option Squelch" or "Channel Option Power", refer to the
setting on the CHANNEL CONFIGURATION screens (F4/F4) for
the various channels to determine how this option will vary.
Position A
Scan Program On Scan Prog. Off
Scan Off Scan Off
Scan Prog. Off Scan Prog. Off
Scan On Scan Off
Direct Repeat
Scan Off Scan Off
Channel Op. Sq. Carrier Squelch
Scan Off Scan Off
Tx PL/Low Pwr Carrier Squelch
Scan Off Scan Off
Direct Repeat
Channel Op. Sq. Carrier Squelch
Tx PL/Low Pwr Carrier Sq. Tx
High Power Low Power
High Power Low Power
Scan Off Scan Off
Channel Option Sq. Carrier Squelch
Repeat Repeat
Scan Off Scan On
Channel Option Repeat
Talkaround Scan Off
Scan Off
Channel Option Repeat
Talkaround
Scan Off Scan Off
No function No function
No function No function
Position B Position C
Scan Prog. Off
Scan On
Scan Prog. On
Scan Off
Repeat
Scan On
Scan On
Carrier Squelch
Scan On
Repeat
Carrier Squelch
Carrier Sq. Tx
(PAC•RT) (PAC•RT)
Low Power
Channel Op.
Power
Scan On
Carrier Squelch
Direct
Scan Off
Repeat
Scan On
Repeat
Scan On
No function
No function