Transmit Alignment Menu - Motorola HT 1000 User Manual

Transmit
Alignment Menu
BB
24
From the MAIN MENU, press F2 twice to access the TRANSMIT
ALIGNMENT MENU.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model:
Serial:
...SERVICE:XMTR ALIGN
F1 - HELP
F2 - Reference Frequency Alignment
F3 - Transmit Power Alignment
F4 - Transmit Deviation Balance (Compensation) Alignment
F5 - Transmit Deviation Limit Alignment
F6 - Transmit Deviation Limit: Reference Softpot
F7 - Transmit VCO Crossover Alignment
F8 -
F9 -
F10 - EXIT
F1 F2 F3
HELP REF TRANSMIT
FREQ POWER
Standard periodic alignment procedures are performed from this
menu. From here, you can navigate to six screens where various
alignment settings are specified. You should refer to the appropriate
(HT 1000, JT1000 or VISAR) Radio Service Manual for specific details
of these alignment procedures.
These procedures should only be attempted by
!
qualified service personnel. Failure to perform
alignment procedures properly may result in seriously
Caution
degraded radio or system performance.
Signalling deviation for MDC, DTMF, or Single Tone must be checked
any time that the radio is serviced and must be adjusted whenever any
of the modulation circuitry is replaced. Before adjusting signalling
deviation, radio compensation/deviation adjustments must be made.
No adjustments are required however for DPL or TPL deviation.
Please make sure <Caps Lock> is not
enabled before pressing F2-F9.

TRANSMIT ALIGNMENT MENU

-----------------------
F4 F5 F6 F7
DEV DEV DEV VCO
BAL LIMIT REF XOVER
F8 F9 F10
EXIT