Scan List - Motorola HT 1000 User Manual

Scan List

DCH
Function Key Descriptions
F2 - SCAN CONFIG
(Scan Configuration)
F5 - PRINT
Field Definitions
Scan List Entries
134
From the MAIN MENU, press F4, F3 and then F8 to access this screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model :
Serial:
CHANGE:RADIO:SCAN LIST
1............Disabled
2............Disabled
3............Disabled
4............Disabled
5............Disabled
6............Disabled
7............Disabled
8............Disabled
F1 F2 F3 F4
HELP SCAN
CONFIG
You can specify scan list entries from this screen.
Brings up a screen where you can configure the radio's scan function.
Prints the current system configuration.
Use the UP/DOWN arrow keys to determine whether a channel is
included (enabled) or excluded (disabled), from the scan list.
The default is Disabled.
Note: Only the number of channels appropriate for the particular
model will be
"Unprogrammed" in the CHANNEL CONFIGURATION screen
(F4/F4), it will be removed from the Scan List when you exit this
screen. Be sure to set channels to "Programmed = Yes" before
adding them to the scan list.
Use <: keys to enable/disable feature.
Use <Enter> to go to next feature.
Scan List
---------
9............Disabled
10...........Disabled
11...........Disabled
12...........Disabled
13...........Disabled
14...........Disabled
15...........Disabled
16...........Disabled
F5 F6 F7
PRINT
displayed. If a channel
F8 F9 F10
EXIT
is marked as