Radio System Configuration - Motorola HT 1000 User Manual

Radio System
Configuration
DCB
Function Key Descriptions
F2 - VISAR OPTIONS
F3 - JT1000 OPTIONS
(Not shown)
F5 - PRINT
F9 - DEFAULT
From the MAIN MENU, press F4, F3 and then F2 to access this screen.
MOTOROLA Radio Service Software
HT/JT1000/VISAR Model : H05UCH6AA7DN
Serial:
CHANGE:RADIO:SYS CONFIG
Maximum Channel................16
Timeout Timer (sec)............60
Auto Reset Timer (sec).........10
CS Sleep Period (ms)..........105
PL Sleep Period (ms)...........60
AGC......................Disabled
F1 F2 F3 F4
HELP VISAR
OPTIONS
Note: The VISAR OPTIONS (F2) function will be visible only if a
VISAR model number is read. If an HT 1000 or JT1000 model
number is read, the VISAR OPTIONS function will not be
displayed.
The JT1000 OPTIONS (F3) function will be visible only if a JT1000
model is read. If an HT 1000 or VISAR model number is read, the
JT1000 OPTIONS function will not be displayed.
Press Tab to select the desired field, or press the desired function key
(F1 - F10). If a field is selected, press the UP/DOWN arrow keys to select
the desired choice or value.
This function will be displayed only for VISAR models. Brings up a screen
where you can modify additional system configuration options for
VISAR radios.
This function will be displayed only for JT1000 models. Brings up a screen
where you can modify additional system configuration options for
JT1000 radios.
Prints the system configuration for the current codeplug.
Resets the fields on this screen to their default values.
Use <: keys to scroll value.
Use <Enter> to go to next feature.
System Configuration
--------------------
Clear Chan Definition....Matched PL
Transmit LED................Enabled
Flashing LED.....Chan-Busy/Low-Batt
Quick Key Override..........Enabled
Tx Inhibit Monitor Func.....Enabled
Battery Saver PL Lockout...Disabled
F5 F6 F7
PRINT
F8 F9 F10
DEFAULT EXIT
73