Displaying And Maintaining A Fabric; Fabric Building Configuration Examples; Static Fabric Building Configuration Example - HP 5920 SERIES Fc And Fcoe Configuration Manual

The switch obtains the SCSI-FCP information.
•
The fc wwn default-fc4-type command can configure only one combination of FC4-Type and Feature at
a time.
To configure the default FC4 information for a node:
Step
1. Enter system view.
2. Configure the default
FC4 information for a
node.

Displaying and maintaining a fabric

Execute display commands in any view.
Task
Display the domain information of a VSAN.
Display the list of domain IDs dynamically allocated in
a VSAN.
Display fabric timers.
Display the WWN of the local switch.
Display node login information.
Display the SCR table for an N_Port.
Display name service database information.
Display ESS negotiation results.

Fabric building configuration examples

Static fabric building configuration example

Network requirements
As shown in
Command
system-view
fc wwn wwn-value default-fc4-type
{ type-value feature feature-map |
scsi-fcp feature { feature-map | both |
initiator | target } }
Figure 25, use the static method to build a fabric.
Command
display fc domain [ vsan vsan-id ]
display fc domain-list [ vsan vsan-id ]
display fc timer [ distributed-services | error-detect |
resource allocation ] [ vsan vsan-id ]
display fc switch-wwn
display fc login [ vsan vsan-id ] [ count ]
display fc scr-table [ vsan vsan-id ] [ count ]
display fc name-service database [ vsan vsan-id [ fcid
fcid ] ] [ verbose ]
display fc name-service database [ vsan vsan-id ]
count
display fc ess [ vsan vsan-id ]
62
Remarks
N/A
By default, no default FC4
information is configured.