Stopping A Topology Discovery; Displaying And Maintaining Fcs; Fcs Configuration Example; Network Requirements - HP 5920 SERIES Fc And Fcoe Configuration Manual

The switch processes local topology changes in real time, regardless of topology discovery.
To start a topology discovery:
Step
1. Enter system view.
2. Start a topology
discovery in specified
VSANs.

Stopping a topology discovery

Step
1. Enter system view.
2. Stop a topology
discovery in specified
VSANs.

Displaying and maintaining FCS

Execute display commands in any view.
Task
Display the topology discovery status.
Display the FCS database information.
Display IE information.
Display port information.

FCS configuration example

Network requirements

As shown in
management application.
Command
system-view
fcs discovery start
[ age interval ] vsan
vsan-list
Command
system-view
fcs discovery stop vsan vsan-list
Figure 41, start a topology discovery to obtain topology information in the fabric for the
Remarks
N/A
You can start a second topology discovery for the
same VSAN only after the first topology discovery is
complete. Otherwise, the system displays the
message "FCS discovery is being performed".
Command
display fcs discovery status [ vsan vsan-id ]
display fcs database [ vsan vsan-id ]
display fcs ie [ vsan vsan-id ] [ nwwn wwn ] [ verbose ]
display fcs port [ vsan vsan-id ] [ pwwn wwn ]
[ verbose ]
143
Remarks
N/A
After you execute this command, the
system performs the following
operations:
•
Stops the topology discovery in
progress.
•
Deletes the topology information
obtained from non-local
switches.
•
Changes the topology discovery
status back to localOnly.