# Display detailed information for FC aggregation group 1 on Switch A.
[SwitchA] display san-aggregation verbose interface san-aggregation 1
Interface SAN-Aggregation1:
State
Mode
Speed
Member port number
Selected port number : 2
Member port
Fc1/0/1
Fc1/0/2
The output shows that:
FC 1/0/1 and FC 1/0/2 are Selected and can perform load sharing.
•
The speed of the FC aggregate interface is 8 Gbps, which is the sum of the speed of each Selected
•
FC interface.
When an FC interface fails, the traffic can be transmitted over the other FC interface, which
•
improves the link reliability.
: UP
: E
: 8Gbps
: 2
State
Mode
Speed
UP
E
4Gbps
UP
E
4Gbps
27
Selected
Y
Y