Removing The Head Restraints; Installing The Head Restraints; Adjusting The Height Of The Head Restraints; Head Restraint Precautions - Lexus RX 450H Owner's Manual

Removing the head restraints

■
Pull the head restraint up while pressing the lock
release button.
If the head restraint touches the ceiling, making
the removal difficult, change the seat height or
angle. (→P. 165, 166)

Installing the head restraints

■
Align the head restraint with the installation
holes and push it down to the lock position.
Press and hold the lock release button when
lowering the head restraint.

Adjusting the height of the head restraints

■
Make sure that the head restraints are adjusted
so that the center of the head restraint is closest
to the top of your ears.
Adjusting the center rear seat head restraint
■
Always raise the head restraint one level from the stowed position when using.
WARNING

Head restraint precautions

■
Observe the following precautions regarding the head restraints.
Failure to do so may result in death or serious injury.
Use the head restraints designed for each respective seat.
●
Adjust the head restraints to the correct position at all times.
●
After adjusting the head restraints, push down on them and make sure they are
●
locked in position.
Do not drive with the head restraints removed.
●
RX450h_U_OM0E023U
3-3. Adjusting the seats
Lock release button
Lock release button
181
3