Recall Procedure; To Stop The Position Recall Operation Part-Way Through; Operating The Driving Position Memory After Turning The Power Switch Off; In Order To Correctly Use The Driving Position Memory Function - Lexus RX 450H Owner's Manual

Recall procedure

■
Check that the shift lever is in P.
1
Turn the power switch to ON mode.
2
Press one of the buttons for the
3
driving position you want to recall
until the buzzer sounds.

To stop the position recall operation part-way through

■
Perform any of the following:
Press the "SET" button.
●
Press button "1", "2" or "3".
●
Operate any of the seat adjustment switches (only cancels seat position recall).
●
Operate the tilt and telescopic steering control switch (only cancels steering wheel
●
position recall).
Seat positions that can be memorized (→P. 165)
■
The adjusted positions other than the position adjusted by lumbar support switch can be
recorded.

Operating the driving position memory after turning the power switch off

■
Recorded seat positions can be activated up to 180 seconds after the driver's door is
opened and another 60 seconds after it is closed again.

In order to correctly use the driving position memory function

■
If a seat position is already in the furthest possible position and the seat is operated in the
same direction, the recorded position may be slightly different when it is recalled.
RX450h_U_OM0E023U
3-3. Adjusting the seats
177
3