Removing The Head Restraints; Installing The Head Restraints; Adjusting The Height Of The Head Restraints; Adjusting The Center Rear Seat Head Restraint - Lexus rx350 2016 Owner's Manual

Hide thumbs Also See for rx350 2016:

Table of Contents

3-3. Adjusting the seats

Removing the head restraints

Pull the head restraint up while pressing the lock

release button.

If the head restraint touches the ceiling, making

the removal difficult, change the seat height or

angle. (P. 152, 153)

Align the head restraint with the installation

holes and push it down to the lock position.

Press and hold the lock release button when

lowering the head restraint.

Make sure that the head restraints are adjusted

so that the center of the head restraint is closest

to the top of your ears.

Always raise the head restraint one level from the stowed position when using.

Head restraint precautions

Observe the following precautions regarding the head restraints.

Failure to do so may result in death or serious injury.

Use the head restraints designed for each respective seat.

Adjust the head restraints to the correct position at all times.

After adjusting the head restraints, push down on them and make sure they are

locked in position.

Do not drive with the head restraints removed.

RX350_U_OM48E90U

Lock release button

Show Quick Links

Table of Contents