Front seats
Adjustment procedure
Seat position adjustment switch
1
Seat cushion (front) angle adjust-
2
ment switch
Vertical height adjustment switch
3
Seatback angle adjustment switch
4
Lumbar support firmness adjust-
5
ment switch
Lumbar support height adjustment
6
switch (if equipped)
Seat cushion length adjustment
7
switch (if equipped)
Power easy access system
■
The driver's seat and steering wheel move in accordance with power switch mode and
the driver's seat belt condition. (→P. 175)
WARNING
When adjusting the seat position
■
Take care when adjusting the seat position to ensure that other passengers are not
●
injured by the moving seat.
Do not put your hands under the seat or near the moving parts to avoid injury.
●
Fingers or hands may become jammed in the seat mechanism.
Make sure to leave enough space around the feet so they do not get stuck.
●
Seat adjustment
■
To reduce the risk of sliding under the lap belt during a collision, do not recline the seat
more than necessary.
If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces
directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk
of death or serious injury in the event of an accident.
Adjustments should not be made while driving as the seat may unexpectedly move and
cause the driver to lose control of the vehicle.
RX450h_U_OM0E023U
3-3. Adjusting the seats
165
3