Lexus RX 450H Owner's Manual page 67

Run the seat belt through the
4
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Fully extend the shoulder belt and
5
allow it to retract to put it in lock
mode. In lock mode, the belt can-
not be extended.
While pushing the child restraint
6
system into the rear seat, allow
the shoulder belt to retract until
the child restraint system is
securely in place.
After the shoulder belt has retracted
to a point where there is no slack in
the belt, pull the belt to check that it
cannot be extended.
If the child restraint has a top tether strap, follow the child restraint manu-
7
facturer's operation manual regarding the installation, using the top tether
strap to latch onto the top tether strap anchor. (→P. 74)
After installing the child restraint system, rock it back and forth to ensure
8
that it is installed securely. (→P. 70)
RX450h_U_OM0E023U
1-2. Child safety
67
1