354
4-5. Using the driving support systems
NOTICE
To prevent the system from malfunctioning
■
If the area around a sensor is subjected to an impact, the system may not operate
●
properly due to the sensor being misaligned. Have the vehicle inspected by your
Lexus dealer.
When using a high pressure washer to wash the vehicle, do not spray the sensors
●
directly, as doing so may cause a sensor to malfunction.
When using steam to clean the vehicle, do not direct steam too close to the sensors
●
as doing so may cause a sensor to malfunction.
To prevent a radar sensor from malfunctioning
■
If the area around a radar sensor is subjected to an impact, the system may not oper-
●
ate properly due to a sensor malfunction. Have the vehicle inspected by your Lexus
dealer.
Observe the radar sensor handling precautions. (→P. 323)
●
To prevent unnecessary operation of the Intelligent Clearance Sonar system
■
In the following situations, disable the Intelligent Clearance Sonar system as the system
may operate even though there is no possibility of a collision.
When inspecting the vehicle using a chassis roller, chassis dynamo or free roller
●
When loading the vehicle onto a boat, truck or other transport vessel
●
If the suspension has been modified or tires of a size other than specified are installed
●
If the front of the vehicle is raised or lowered due to the carried load
●
If towing eyelets are installed
●
RX450h_U_OM0E023U