Pre-Collision System Operational Conditions - Lexus RX 450H Owner's Manual

Operational conditions
■
Availability of the pedestrian detection function depends on the region in which the vehi-
cle was sold. (For specific countries/areas: →P. 282)
Read the following for details:
Region A

(The pedestrian detection function is available)
The pre-collision system is enabled and the system determines that the possibility of a
frontal collision with a vehicle or pedestrian is high.
Each function is operational at the following speeds:
Pre-collision warning:
●
• Vehicle speed is between approximately 7 and 110 mph (10 and 180 km/h). (For
detecting a pedestrian, vehicle speed is between approximately 7 and 50 mph [10
and 80 km/h].)
• The relative speed between your vehicle and the vehicle or pedestrian ahead is
approximately 7 mph (10 km/h) or more.
Pre-collision brake assist:
●
• Vehicle speed is between approximately 19 and 110 mph (30 and 180 km/h). (For
detecting a pedestrian, vehicle speed is between approximately 19 and 50 mph [30
and 80 km/h].)
• The relative speed between your vehicle and the vehicle or pedestrian ahead is
approximately 19 mph (30 km/h) or more.
Pre-collision braking:
●
• Vehicle speed is between approximately 7 and 110 mph (10 and 180 km/h). (For
detecting a pedestrian, vehicle speed is between approximately 7 and 50 mph [10
and 80 km/h].)
• The relative speed between your vehicle and the vehicle or pedestrian ahead is
approximately 7 mph (10 km/h) or more.
The system may not operate in the following situations:
If a 12-volt battery terminal has been disconnected and reconnected and then the vehi-
●
cle has not been driven for a certain amount of time
If the shift lever is in R
●
If VSC is disabled (only the pre-collision warning function will be operational)
●
If the PCS warning light is flashing or illuminated
●
RX450h_U_OM0E023U
4-5. Using the driving support systems
287
4