Lexus RX 450H Owner's Manual page 448

448
5-5. Using the other interior features
Programming HomeLink
■
Press and release the HomeLink
1
that the HomeLink
Perform
programming will not be able to be completed.
Point the remote control transmit-
2
ter for the device at the rear view
mirror, 1 to 3 in. (25 to 75 mm)
from the HomeLink
Keep the HomeLink
in view while programming.
For U.S.A. owners

Press and hold the handheld
3
transmitter
HomeLink
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.
Programming an entry gate (for U.S.A. owners)/Programming a device in

the Canadian market
Press and release the remote control transmitter button at 2 second inter-
3
vals, repeatedly, until the HomeLink
flashing (orange) to rapidly flashing (green) (rolling code) or continuously
lit (green) (fixed code).
Test the HomeLink
4
and observing the indicator light:
Device with fixed code: If the indicator light is solid/continuous, pro-
●
gramming has been completed and your garage door or other device
should operate when the HomeLink
Device with rolling code: If the indicator light flashes rapidly, your
●
garage door opener motor (or other device) is equipped with a rolling
code. Complete the programming process by firmly pressing and hold-
ing the programmed HomeLink
the button.
RX450h_U_OM0E023U
®
®
indicator light flashes (orange).
within 60 seconds of
3
®
buttons.
®
indicator light
button until the
®
indicator light
®
operation by pressing the newly programmed button
®
button you want to program and check
, or the indicator light will stop flashing and
1
®
indicator light changes from slowly
®
button is pressed and released.
®
button for 2 seconds and then release