Polaris SPORTSMAN 600 Service Manual page 98

NOTE: While installing in piston pins, cover all engine
passages. The clip could fall into the engine during
installation.
16. Install camshaft thrust plate (G) with new bolts.
Torque bolts to 115 ± 12 in.lbs. (13 ± 1.35 Nm).
NOTE: New bolts have patch lock on the threads and
do not require Loctitet.
17. Assemble rotors as marked when disassembled.
Use a cleaner to remove the marks previously
made on the rotors.
3.48
18. Apply moly lube, lubriplate, or oil to the rotors on
F
NOTE: The application of oil or lubriplate aids in
priming the oil pump during initial engine start up.
G
19. Align the bolt holes and install oil pump assembly
NOTE: For assembly of the gears, the cam gear and
the crankshaft gear are stamped with "This Side Out."
This indicates the side of the gear that faces outward
or away from the case.
NOTE: Before assembly, clean the bolts and bolt
holes with Primer N (PN 2870585) to remove any
the oil pump shaft.
into crankcase. Rotate the rotors in the housing
during installation, as this checks for binding if new
rotors are used.
This Side Out
ENGINE
Line Up Marks
Lubricate Rotors