Airflow Direction Control - Daikin G-Series Service Manual

SiBE04-808_B
1.2

Airflow Direction Control

Power-Airflow The large flaps send a large volume of air downwards to the floor and provide an optimum
control in cooling, dry, and heating mode.
Dual Flaps
Cooling / Dry Mode
During cooling or dry mode, the flap retracts into the indoor unit. Then, cool air can be blown far
and pervaded all over the room.
Heating Mode
During heating mode, the large flap directs airflow downwards to spread the warm air to the
entire room.
Wide-Angle The louvers, made of elastic synthetic resin, provide a wide range of airflow that guarantees a
comfortable air distribution.
Louvers
Auto-Swing The following table explains the auto swing process for cooling, dry, heating, and fan :
3-D Airflow Alternative repetition of vertical and horizontal swing motions enables uniform air-conditioning of
the entire room. This function is effective for starting the air conditioner.
When the horizontal swing and vertical swing are both set to auto mode, the airflow becomes 3-
D airflow and the horizontal swing and vertical swing motions are alternated. The order of swing
motion is such that it turns counterclockwise, starting from the right upper point as viewed from
the front side of the indoor unit.
COMFORT The vertical swing flap is controlled not to blow the air directly on the person in the room.
AIRFLOW
Operation
Function and Control
Vertical Swing (up and down)
Cooling / Dry
15˚
30˚
30˚
55˚
50˚
(R12182)
Cooling
5˚
(R11665)
Heating
5˚
30˚
65˚
70˚
(R11402)
(2)
(3)
Heating
80˚
(R12181)
Main Functions
Horizontal Swing
(right and left)
Fan
30˚
65˚
80˚
(R11403)
(1)
(4)
(R13554)
(R11404)
32