Check The Engine Valve Clearance - Gasoline/Lpg Models; Check The Engine Cylinder Compression - Gasoline/Lpg Models; Clean The Pcv Hoses And Fittings - Gasoline/Lpg Models - Genie S-65 Service Manual

Section 4 - Scheduled Maintenance Procedures
800-610-4101
ActionRental.com
TABLE D PROCEDURES
d
Gasoline/LPG
a
b
c
d
3 Clean up any fuel that may have spilled during
this procedure.
4 Start the engine from the ground controls, then
inspect the fuel filter and hoses for leaks.
If a fuel leak is discovered, keep
any additional personnel from
entering the area and do not
operate the machine. Repair
the leak immediately.
4 - 42
a b c
carburetor
fuel filter
hose from the fuel filter to
the fuel pump
hose from the fuel pump
to the fuel tank (not shown)
Genie S-60 & Genie S-65
Service Manual - Second Edition
D-4
Check the Engine Valve
Clearance - Gasoline/LPG Models
Complete information to perform this procedure is
available in the Ford LRG-423 2.3 Liter Industrial
Engine Service Manual (Ford number: PPD-194-
287). Genie part number 33907.
D-5
Check the Engine Cylinder
Compression
- Gasoline/LPG Models
Complete information to perform this procedure is
available in the Ford LRG-423 2.3 Liter Industrial
Engine Service Manual (Ford number: PPD-194-
287). Genie part number 33907.
D-6
Clean the PCV Hoses and
Fittings - Gasoline/LPG Models
Maintaining PCV hoses is essential to good engine
performance. Improperly functioning PCV hoses
will fail to ventilate the crankcase and continued
use of neglected hoses could result in component
damage.
Perform this procedure with the
engine off.
Part No. 48412