Removing Staple Jams From The Saddle Stitch Unit (Saddle Finisher) - Sharp AR-F15 Service Manual

6) Pull the stitch to the front once, and then
return it to its original position.
Figure 1-335
7) Push in the stitch unit, and close the front
cover.
Figure 1-336
CHAPTER 1 GENERAL DESCRIPTION
F. Removing Staple Jams
from the Saddle Stitch
Unit (Saddle Finisher)
If the host machine indicates the saddle stitch
unit staple jam message, perform the following to
remove the jam.
1) Open the front lower cover.
Figure 1-337
2) Slide out the stitch unit.
Figure 1-338
3) Pull the stapler of the stitch unit to the front
once, and then shift it up.
Figure 1-339
1-21