Feeding System - Sharp AR-F15 Service Manual

: Jan. 9 2004
1
B.

FEEDING SYSTEM

1. Swing unit disassembly
1) Remove the tray section. (Refer to I-A-6,
7.)
2) Remove the grate-shaped upper guide. (Re-
fer to I-A-9.)
3) Remove the grate-shaped lower guide. (Re-
fer to I-A-10.)
4) Remove four connectors [1].
5) Remove the three screws [2] to allow dis-
assembly of the swing unit [3].
6) Open the front door section.
7) Push the staple unit [4] to slide it to the
rear side.
CHAPTER 6 MECHANICAL CONSTRUCTION
[1]
Figure 5-120
Figure 5-121a
Figure 5-121b
[2]
[3]
[4]
5-9