Removing Paper Jams From The Puncher Unit (Option) - Sharp AR-F15 Service Manual

G. Removing Paper Jams
from the Puncher Unit
(option)
If the display indicates a paper jam on the
puncher unit, perform the following to remove the
jam:
1) Open the front cover of the puncher unit.
Figure 1-346
2) Align the triangle mark on the knob within
the range marked by .
Figure 1-347
3) Close the front cover of the puncher unit.
Figure 1-348
CHAPTER 1 GENERAL DESCRIPTION
4) Holding the finisher unit as shown, move it to
detach it from the most machine.
Figure 1-349
5) Remove any jam visible from the outside.
Figure 1-350
6) Open the upper cover, and check the inside of
the finisher.
Figure 1-351
7) Lift the buffer roller cover, and remove the
jam.
Figure 1-352
1-23