Sharp AR-F15 Service Manual page 161

7. Removing the Tray 2 Unit
1) Remove the tray 1 unit.
2) Disconnect the two connectors [1] and
grounding wire [2] and remove harness [3].
3) Lift the tray 2 unit to remove.
8. Removing the Tray 1/2 Lift Motor
1) Remove the tray 1/2.
2) Remove two screws [1], and two lift blocks
[2].
3) Remove the five screws [3], and remove the
tray from the tray unit.
4) Release the two harness stops [1].
Remove the four screws [2], and remove
the tray frame [3]. Release the claws [4] to
remove.
CHAPTER 5 MECHANICAL CONSTRUCTION
[2]
Figure 5-110
[2]
[3]
Figure 5-111
[2]
[1]
[4]
Figure 5-112
[3]
[1]
[2]
[1]
[3]
[3] [2]
[4]
5-5