Sharp AR-F15 Service Manual page 195

8) Turn the gear [7] in the direction of the ar-
row, and move the punch unit section [8] to
the front side.
9) Remove the three screws [9] and sensor
mount (upper) [10]. Disconnect the connec-
tor [11] on the photosensor PCB and the
connector [12] on the LED PCB.
CHAPTER 5 MECHANICAL CONSTRUCTION
[8]
[7]
Figure 5-317
[9]
[9]
[10]
[12]
Figure 5-318
[11]
[9]
5-39